 |
|
|
|
 |
| SYS-1029U-TN10RT |
- SuperServer 1029U-TN10RT (Black)
|
| |
|
Super X11DPU |
| |
|
| CPU |
- Dual Socket P (LGA 3647)
- Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
| Cores |
- Up to 28 Cores with Intel® HT Technology
|
| |
|
| Memory Capacity |
- 24 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
|
| Memory Type |
- 2666/2400/2133MHz ECC DDR4 SDRAM
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| Network Connectivity |
- 2 10GBase-T ports via AOC-URN6-i2XT
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| |
|
| NVMe |
- 6 NVMe ports (NVMe from CPU 1)
- 4 NVMe Hybrid ports with optional SAS3 (NVMe from CPU 2)
|
| LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
| Video |
- 2 VGA ports (1 rear, 1 onboard)
|
| Serial Port |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
|
| |
|
| Software |
- Intel® Node Manager
- Redfish API
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SSM, SPM, SUM
- SuperDoctor® 5
|
| Power Configurations |
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- UID LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 slots (Full-height, 10.5"L)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
|
| Hot-swap |
- 10 Hot-swap 2.5" drive bays
- 10 NVMe (4 hybrid ports for optional SAS3 via AOC)
|
| M.2 |
- 1 M.2 NVMe (2242/2260/2280*/22110*)
- 1 M.2 SATA (2242/2260/2280*/22110*) via optional SATA cable
Not supported if installing both NVMe & SATA M.2
|
|
| |
|
| Fans |
- 8 Heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X11DPU
CSE-119UAC10-R1K02P-N10T |
1
1 |
Super X11DPU Motherboard
CSE-119UAC10-R1K02P-N10T |
| Add-on Card / Module |
AOC-SLG3-2E4R-P |
1 |
NVMe AOC by 8,HF,RoHS/REACH |
| Add-on Card / Module |
AOC-URN6-I2XT-P |
1 |
AOC-URN6-I2XT |
| Backplane |
BPN-SAS3-116A-N10 |
1 |
10-port 1U SAS3 12Gbps Hybrid backplane, support up to 10x 2.5-inch NVMe storage devices, 4 of them are SAS3/SATA3 drives compatible. |
| Cable 1 |
CBL-CDAT-0728 |
1 |
4 Pin to 4 Pin I2C cable, 65cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH |
| Cable 2 |
CBL-PWEX-0780 |
1 |
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),40/40CM,18AWG,RoHS |
| Cable 3 |
CBL-PWEX-0781 |
1 |
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),65/65CM,18AWG,RoHS |
| Cable 4 |
CBL-SAST-0820 |
2 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
| Cable 5 |
CBL-SAST-0849 |
2 |
MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 57CM,34AWG |
| Cable 6 |
CBL-SAST-0964 |
1 |
Oculink v1.0 6x cable bundle 549/574/425/444/571/603mm 34AWG |
| Parts |
MCP-130-81901-0N |
1 |
Oculink cable connection plastic holder for AOC-URN6-i2XT |
| Air Shroud |
MCP-310-81910-0N |
1 |
Plastic air shroud for SC819U, 119U (X11 24DIMM, left side) |
| Air Shroud |
MCP-310-81911-0N |
1 |
Plastic air shroud for SC819U, 119U (X11 24DIMM, right side) |
| Riser Card |
RSC-R1UW-2E16 |
1 |
RSC-R1UW-2E16-O-P |
| Riser Card |
RSC-UMR-8 |
1 |
1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE |
| Heatsink / Retention |
SNK-P0067PS |
2 |
1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
| Power Supply |
PWS-1K02A-1R |
2 |
1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
| FAN 1 |
FAN-0101L4 |
8 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
| Rear Window |
MCP-240-81909-0N |
1 |
Ultra I/O Rear Window for SC819U, 119U-T tool-less chassis(i2XT
|
|
|
|
Server system integrator & worldwide shipping
Personal approach and tailor-made servers
NBD warranties & cross-shipping
Private cloud infrastructure
Pre-sales & After-sales support
